Image 1

Mitsubishi Diesel Eng - SS-Series 42 to 83 HP

Get An Immediate Quote!
In Stock Nationwide Delivery!
  • Product Description

    QtyPart NumberDescription
    1 AKFH-1544 Lube oil filter
    1 AKFG-1583 Fuel filter
    1 591010045 Fan belt
    1 32A0413200 Rocker cover gasket
    1 32A9400040 Complete gasket set
    1 AKFA-1655 Heavy duty air filter safety cartridge
    1 AKFA-1654 Heavy duty air filter main cartridge
    1 31A9000500 Oil pressure switch
    1 MC880901 Water temperature switch
    16 3440402901 Valve collet
    8 3060431601 Valve spring washer
    1 32A6610101 Electric starter
    1 32A6800400 Charging Alternator
    1 32A1909041 Half conn rod bearing
    1 32A47-02800 Bottom radiator hose
    8 32A47-02700 Top radiator hose
    4 32A0101600 Valve guide
    1 32C6106000 Complete fuel injector
    3 32A0900010 Main bearing set std
    4 32B0908101 Thrust washer set
    8 32A1702010 Piston rings set std
    1 32A0402801 Valve seal
    4 32A4601400 Thermostat seal
    4 MD070717 Injector seal
    1 31B6110100 Fuel return gasket
    1 3440711090 Leap seal crank rear
    4 F301507023 Kit leap seal crank front
    8 3466102000 Fuel Injector nozzle
    4 3130411700 Valve cap
    1 32A1710100 Piston
    1 32A4510030 Complete water pump
    1 3446109050 Fuel lift pump
    8 32A6501720 Injection pump
    4 3060421402 Valve spring
    4 32A0103100 Inlet valve seat
    1 32A0103200 Outlet valve seat
    4 M372X02871 Solenoid (starter)
    4 32A0400202 Inlet valve
    1 32A0401202 Outlet valve
    1 32A4602100 Thermostat


    • Ribbed thin-wall cast iron crankcase for added strength and durability
    • Internal crankcase breather for reduced emissions (naturally aspired model only)
    • Extra large bearing surfaces for low bearing loads and long life


    • Designed to run at up to 25 degrees of inclination
    • Full flow spin-on cartridge filter
    • Forced circulation by trochoid gear pump
    • Oil Capacity:    2.64 gal. (10 ltr)


    • Bosch style fuel injection pump


    • Standard crankcase side mounting pads for flexible mounting arrangements
    • Rear engine support available from side mounting pads on SAE 3 housing


    • Forced circulation by centrifugal pump
    • Cooling packages available for ambient temperatures up to 108o F (42o C)
    • Variable Speed (VS)--Suction Generator Drive (GD)--Pusher


    • Starter: 12V, 2.2kW
    • Alternator: 12V, 50 amp with integral regulator
    • Glow Plugs: 12V
    • High water temperature and low oil pressure switches
    • Stop Solenoid: 12V, energized to run (ETR) solenoid


    • Mechanical governing is provided for either variable or constant speeds


    • SAE 3 flywheel housing and 11.5in flywheel (GD & VS models)
    • Rotation direction: counter-clockwise, facing the flywheel
    • Side PTO drives are available for mounting at the gear end
  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Warranty Information

    Brand New, 1 Years International Warranty

  • Find Similar Products by Category